HEAVY DUTY CLEANER / DEGREASER
Solvit is a heavy duty,
non-caustic degreaser formulated for the removal of mineral oils and grease.
Solvit is water rinsable and may be diluted with water for economy. Approved to MAF C31 Classification.
Workshop maintenance cleaning
Vinyl cleaning (upholstery and floor)
Removal of metalised (acrylic) polishes
Fleet washing (heavy duty)
Steam cleaning and water blasting
Appearance: Clear red liquid
Specific Gravity @ 20°C: 1.040 - 1.045
Flash Point: Non-flammable
METHOD OF USE:
1. Heavy Duty: For heavily soiled and porous surfaces best used undiluted. Apply to surface, scrub in and allow to dwell for ten to fifteen minutes. Hose or wipe off.
2. Normal Duty: Dilute with water and use as above. Dilution rates vary according to nature and degree of soil, but as a guide use one part of Solvit to nine parts of water (10% v/v).
3. Steam Cleaning and Water Blasting: Vary according to nature and degree of soil but as a guide use at 1-5%.
Do not apply to paint work in direct sunlight or allow to dry on surface. With water-based or porous paints, spot-check on a non-critical area.
Avoid excessive skin contact as drying of the skin may result. Wash eye splashes with water immediately.
Issue Date: 25.06.93